Main characteristics:

• Wide range of all AISI-304 stainless-steel furnishings, with BA finish (mirror finish).
• Modular design with multiple combinations of the different components.
• All points completely accessible to facilitate cleaning and control.
• Corners and edges rounded, with radius lower than 3 mm.
• Edges folded over, no sharp points.
• Lower sliding doors guides with open rails to avoid any dirt trap.
• All outer visible parts have a Level 6 finish with certifiable maximum safety, RA-0.30mm.

NSF Certification which defines quality, construction and operator safety standards.

Go to products list / contact

Work benches, double sided or wall standing:

Many solutions allowing a bench to be assembled according to customer requirements.
• Module with drawers and cupboards with sliding or swinging doors combined in different sizes and positions according to work requirements.
• Lengths from 480 to 4.000 mm
• Depth 550/ 650/ 750 mm
• With or without backsplash depending on whether they are wall or free-standing
• Adjustable feet, with invisible rail.

Go to products list / contact



     
   


 
 

Workbenches:

• Workbenches with demountable round structure or with fixed tubular frame
• Stainless steel 57-mm tubular structure.
• Models with or without: drawers/ lower shelf/ wheels.
• Length: 1.500/2.000/2.500/3.000/3.500/4.000 mm
• Depth: 600/700/900/1.200 and 1.400.
• With or without backsplash.

Go to products list / contact



     
   
 
   
 
 

Cupboards:

• With sliding or swinging doors.
• Shelves adjustable height (every 20 mm).
• Lower sliding door track has open rail to avoid accumulation of dirt.
• Optional sloping top.
• Lockable.
• Length: 530/ 700/ 1.400 mm.
• Height: 1.960 mm.
• Depth: 500/ 700 mm.

Go to products list / contact




     
   
 
   
 
 

Wall cupboards:

• Designed to store small materials.
• With sliding or swinging doors.
• With interior trays, adjustable height every 20 mm.
• Perforated drying shelves for washed materials.
• Length 500/ 1.000 and 1.500 mm.
• Height: 600 and 1000 mm

Go to products list / contact


     
   
 
   
 
 

Drawer cupboards for punches:

• Drawers designed in their interior according to the models of punches or other utensils.
• Vertical closure, all drawers closing at the same time.
• With wheels: 960 x 680 x 900 mm
• With adjustable feet: 480 x 650 x 1.400 mm

Go to products list / contact



     
   
 
   
 
 

Sinks:

• All kinds of models and sizes.
• With or without sliding doors, or swinging doors
• With or without lower shelf
• Single or double bowl with drainer rack
• Comes with backsplash and anti-spill edge trim
• Sizes from 700 to 2.500 mm

Go to products list / contact



     
   
 
   
 
 

Service cupboards:

• With wheels for serving production lines.
• Wide variety of designs to meet work requirements.



Go to products list / contact


 
     
   
 
   
 
 

Reading stands- high desks:

• With or without drawers and bottom shelves.
• Open or closed.

 



Go to products list / contact



     
   
 
   
 
 

Shoe benches:

• With or without 1 or two shoe shelves
• With bottom trays open on one or both sides
• Varied sizes and special designs.








Go to products list / contact

     
   
 
   
 
 

Hangers, hooks and miscellaneous systems:

• To organize, hang and store garments in dressing rooms.
• Wall racking, with floor support, mobile or not.





Go to products list / contact



     
   
 
   
 
 

Disposable material dispensers:
(lab coats, caps, overshoes, etc….)

• With swinging cover for filling or dispensing.

Model description
04160564DXPEQ0000
Small Dispenser – 200 x 185 x 250 mm
Filling and dispensing through the top cover.
Depressed front open to facilitate dispensing from the front.

Model description
04160564DXGDR0000
Large Dispenser – 330 x 185 x 250 mm
Filling and dispensing though the top cover.
Front transparent methacrylate visor for visual control of interior.


Go to products list / contact


     
 
 

Waist containers:

• Cylindrical, rectangular or with visible plastic bag
• Garbage containers, foot operated, on wheels.









Go to products list / contact

     
   
 
   
 
 

Furniture for prosthetics:

Extensive line of stainless steel furniture with Work Benches specially designed for specialists in prosthetics, with modules for the wax and metal melting, compressed air gun, drawers for holding plaster, removable decanting bowls, wall cupboards, waste bin, fume hoods, etc…
Compliance with the NSF Standard guarantees hygiene, safety and easy cleaning.



Go to products list / contact